Product Overview

ManualsBrandsMetacaulk ManualsFirestop ProductsFirestop Putty Sticks (18 Cubic Inches)

10. LIMITED WARRANTY

RectorSeal makes the Limited Express Warranty that at the date of delivery this product will be free from defects in RectorSeal materials and workmanship. THIS LIMITED EXPRESS WARRANTY

IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND

OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL . The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase price. All other liability is negated

and disclaimed, and RectorSeal shall not be liable for incidental or consequential damages.

Suggestions and recommendations covering the use of our products are based on our past experience and laboratory ﬁndings. However, as we have no control as to the methods and conditions

of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.

G-13

Metacaulk

Fire Rated Putty and Putty Pads

the stud and adhere. Work

pad to the opposite side of

the box and over the edges

(Step 2). If wall membrane is

in place, pack putty into gaps

between box and gypsum

board slightly overlapping

inner wallboard surface. If

membrane is to be installed

after pad installation, overlap

front edge of box so that putty

will be compressed around

edges of box as wallboard is

installed. Cut slits in pad to

fit around conduit or cables

(Step 3). Press pad to surface

of top, bottom, and sides of

box (Step 4). Trim excess at

corners and apply to conduit

ﬁttings connected to the box.

Remove exposed liner. Op-

tionally, putty may be packed

into inside of conduit ﬁttings

to prevent passage of smoke.

Only one putty pad thickness

(1/8") is needed for a 1 or 2

hour rating.

5. Testing Data

Metacaulk

Fire Rated Putty

is classified by Underwrit-

ers Laboratories, Inc. as a

fill, void or cavity material.

Metacaulk

Fire Rated Putty

Pads are classiﬁed as a wall

opening protective material.

For speciﬁc test criteria see

UL Fire Resistance Directory

or call

RECTORSEAL.

Metacaulk

Fire Rated Put-

ty was tested at a minium

0.01 inch of water, positive

pressure in accordance with

UL 1479, ASTM E 814 and

CAN4-S115-M.

6. Storage & Handling

Metacaulk

Fire Rated Putty

is not to be stored in areas

where the temperatures ex-

ceed 120˚F or drop below

0˚F. Best if protected from

freezing. If freezing occurs,

thaw completely before using.

Keep products dry and stored

under protective cover in their

original containers. Products

have a minimum shelf life of 2

years subject to re-inspection

thereafter. A stock rotation

program is recommended.

7. Availability

Moldable Fire Rated Putty

available in 1 1/2 inches di-

ameter by 10 inches long (18

cubic inches)

Moldable putty pads are 6

inches by 7 inches by 1/8 inch

thick.

8. Limitations

Do not expose to water.

9. CAUTIONS

FOR CHEMICAL EMER-

GENCY, SPILL, LEAK, FIRE,

EXPOSURE OR ACCIDENT,

CALL CHEMTREC - DAY OR

NIGHT 1-800- 424-9300.

For additional information,

refer to Material Safety Data

Sheet

For additional technical

service,

call: 1-800-231-3345

Fax: 1-800-452-2824

RECTORSEAL

2601 Spenwick Drive Houston, Texas 77055