Brochure

8
WWW.METACAULK.COM
For Technical Assistance,
Call 713-263-8001 or Toll Free 1-800-231-3345
Fax [phone] or 1-800-441-0051
®
Firestopping Solutions
®
Firestopping for
Electrical Outlet Boxes
METACAULK
®
Fire-Rated Putty Sticks & Pads
Metacaulk
®
Putty Sticks are used to seal around penetrating items through re-
rated walls, oors and within blank openings. For use with electrical cables, conduit
and metal pipes. Hand moldable with no curing time required. Will not dry out
and can be re-used as additional penetrating items are removed or installed.
• Easy to Install / Applied by Hand
• No Asbestos Fillers
• No Mixing
• Adheres to all common
building surfaces
Metacaulk
®
Putty Pads are used to maintain the hourly rating of re-rated
walls containing electrical outlet boxes and to reduce sound transmission.
Only one pad thickness (1/8 inch) is required for a 1 or 2 hour re rating. No
additional putty material needed to plug the end of each electrical metallic
tube or conduit at its connection to the box. Hand moldable with no curing time
required.
STC rating 49, Tested in a UL 411 wall assembly/section to ASTM E90.
Code Description
Quantity
per Case
66345 18 cubic inches 12
Code Description
Quantity
per Case
66340 6” x 7” 1/8” thick 20
66335 7” x 7” 1/8” thick 20
METACAULK
®
Cover Guard™
Metacaulk
®
Cover Guard
™
is a single component, re-rated gasket for use with
electrical boxes to comply with the “24 inch rule”. Metacaulk
®
Cover Guard
™
ts under
the cover plate and does not take up volume in the electrical box. It is a labor saving
replacement for putty pads in normal applications.
STC 54 rating, Tested in a UL 411 wall
assembly/section to ASTM E90. Patent Pending.
• Easy to install - Cost effective
• UL Classied as a Wall Opening
Protective Material
• Great for retrot applications
• Reduces sound transmission
Code Description
Quantity
per Case
66270 Double Receptacle 50
66272 Single Receptacle 50
66274 Double Switch 50
66276 Single Switch 50
66266 Double Decor 50
66265 Single Decor 50
METACAULK
®
Box Guard™
Metacaulk
®
Box Guard
™
is a highly
intumescent, re-rated pad for use in
electrical boxes. When complying with
the “24 inch rule”, it is inserted on the
inside back wall of an electrical box.
When exposed to re, Box Guard
™
will expand forming a char that will
seal off the opening and prevent
the spread of ames and limit the
temperature rise on the unexposed
surfaces. A labor saving, economical
alternative to putty pads. Great for
retrot jobs.
STC 53 Rating, Tested in a UL
411 wall assembly/section to ASTM E90.
Code Description
Quantity
per Case
66366 Single Box 50
66367 Double Box 50
66369 4 11/16” x 4 11/16” 50
• Easy to install
w/ Self-adhesive strip
• Cost effective
• UL Classied as a Wall Opening
Protective Material
• Highly intumescent
• Non-conductive
• Dielectric breakdown voltage
22V/mil (ASTM D 149)