Operating instructions

Operating Instructions
Use
METACAP Spray Gun D/A
Version/Edition July 2008
3-5
3 Use
3.1 Intended Use
The METACAP Spray Gun is exclusively intended for:
— the spraying of coating materials (paint, lacquer, stripping agent, oil,
fatty matters and similar substances).
— the combined use with conveying equipment and circulation systems for
coating materials and with METACAP Bottom Cup Sets.
— Use only conductive tubing. (more information see 5.1 Risk of Fire and
Explosions)
3.2 Incorrect Use
— Never point the spray beam and/or air jet at living things.
There is a risk of injury.
— Never exceed the admissible working pressures of the coating device /
of the spray gun.
— Use accessories or spare parts supplied or recommended by the
manufacturer only.
— Before effecting any maintenance work or cleaning procedures, always
switch off the air and the material supply. Actuate the spray gun to
reduce the pressure of the coating device.
— Never use the METACAP Spray Gun D/A in combination with airless
pumps or with pumps for air-supported airless.
— Do not atomize acids, caustic solutions, removers and similar
substances.
— Do not use non-conductive tubing.