HAMMERS 62 |
HAMMERS TIME TO GET TOUGH. When we do something, then we do it right. That is why our hammers are how tools for industry should be: robust, powerful and durable. Our complete range of hammers are shown on the following pages. You are certain to find your power package for the toughest applications: Metabo. Work. Don’t play.
HAMMERS LET THE MACHINE DO THE WORK. Metabo has one of, if not the widest SDS hammer range blows allowing the user to effortlessly drive the bit or in the market. Our hammers hit hard and are perfect for chisel into masonry. working in hard materials such as stone or concrete. The robust, ergonomic, powerful and reliable, all properties pneumatic hammer mechanism generates high-energy that the trade demands. Rubber-coated handle a comfortable, secure grip.
Versions Page Cordless hammers – – BHA 18 1,6 J 66 NEW 13 22 KHA 24 2,2 J 66 CODE! Multihammers 13/8 30/20 1./2. gear UHE 22 Multi 2,2 J 16/8 UHE 28 Multi 2,4 J 40/20 1./2.
CORDLESS HAMMERS COMMON FEATURES Suitable for bits and accessories with SDS-plus shank end With the appropriate accessories, it is also suitable for bits and accessories with cylindrical shank end (no impact) Pneumatic high-performance hammer mechanism Hammer stop Light and fast Favourable centre of gravity position Clockwise and anticlockwise rotation Easy and quick change of battery pack Metabo VibraTech (MVT): Active or passive vibration damphing system help reduce the risk of developing vibration white
ANGLE GRINDERS MULTIHAMMERS The engineers of power 1st gear/2nd gear Drilling diameter in – concrete with hammer drills – steel – softwood 20 mm 10 / 6 mm 20 / 14 mm No-load speed 0 – 1,000 rpm / 0 – 2,800 rpm Torque 15 Nm / 6 Nm Single-blow energy 2,0 Joule Maximum impact rate 4,600 r p m Rated input power 705 W Bit retainer SDS-plus Weight (without mains cable) 3.2 kg HAMMERS Technical data – P´7911 METAL PROCESORS A perfect rotary hammer. The P´ 7911.
MULTIHAMMERS COMMON FEATURES Suitable for bits and accessories with SDS-plus shank end or cylindrical shank end (without impact) Hammer stop Rotation stop Metabo "Quick" chuck change Clockwise and anticlockwise rotation Thumbwheel for preselection of speed Robust Metabo Marathon motor Two-speed gear unit Pneumatic high-performance hammer mechanism Die cast aluminium gear housing Ergonomic housing design for fatigue-proof operation Rubber-coated handle Metabo S-automatic torque limiting clutch Metabo windin
Optimum weight distribution by L shape Ergonomic housing design for fatigue-proof operation Rubber-coated handle Metabo VibraTech (MVT) handle for vibration damping Metabo S-automatic torque limiting clutch Scaffolding hook (accessory) for hanging the machine on scaffoldings or ladders HAMMERS METAL PROCESORS COMMON FEATURES Suitable for bits and accessories with SDS-plus shank end With the appropriate accessories, it is also suitable for bits and accessories with cylindrical shank end (no impact) Hammer
ROTARY HAMMERS COMMON FEATURES Suitable for bits and accessories with SDS-plus shank end With the appropriate accessories, it is also suitable for bits and accessories with cylindrical shank end (no impact) Hammer stop Clockwise and anticlockwise rotation Robust Metabo Marathon motor Pneumatic high-performance hammer mechanism Die cast aluminium gear housing Ergonomic housing design for fatigue-proof operation Rubber-coated handle Metabo S-automatic torque limiting clutch Metabo winding protection grid Aut
COMMON FEATURES Suitable for bits and accessories with SDS-plus shank end With the appropriate accessories, it is also suitable for bits and accessories with cylindrical shank end (no impact) Hammer stop Rotation stop Clockwise and anticlockwise rotation Metabo "Quick" chuck change Robust Metabo Marathon motor ANGLE GRINDERS COMBINATION HAMMERS CODE! IMPACT DRILLS HAMMERS METAL PROCESORS Pneumatic high-performance hammer mechanism Die cast aluminium gear housing Ergonomic housing design for fatigue-p
COMBINATION HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS-plus shank end With the appropriate accessories, it is also suitable for bits and accessories with cylindrical shank end (no impact) Hammer stop Rotation stop Metabo CODE! System: electronic anti-theft system, activated by CODE! key (accessory) Clockwise and anticlockwise rotation Metabo "Quick" chuck change Vario Tacho Constamatic (VTC) full-wave electronics Robust Metabo Marathon motor Pneumatic high-performance hammer mecha
METAL PROCESORS HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS-max shank end With the appropriate accessories, it is also suitable for bits and accessories with spline shank or ratio thread Easy to hold in all working situations: three rubber-coated handles always ensure an optimal holding position Metabo VibraTech (MVT): reduced vibration levels and therefore less impact on joints due to the integrated damping system on the handles Additional handle can be fitted to three places on
CHIPPING HAMMERS COMMON FEATURES Suitable for bits and accessories with SDS-max shank end Metabo VibraTech (MVT): reduced vibration levels and therefore less impact on joints due to the integrated damping system on the handles Additional handle can be fitted to three places on the housing The adjustable front handle can be rotated 360° and the angle adjusted Vario Tacho Constamatic (VTC) full-wave electronics Electronic soft start Pneumatic high-performance hammer mechanism Stoppable switch for trouble-fre
A HUNDRED THOUSAND TIMES SUCCESSFUL ON CONCRETE, BRICKWORK AND NATURAL STONE. The most modern generation of hard-metal drills: toughest concrete and granite. Life cycle and drilling Long service life, fast and no problem when cutting on speed are increased considerably, which results in steel reinforcements. The new cutting geometry on the reducing the costs for the user.
SDS-PLUS ACCESSORIES FOR HAMMERS WITH SDS-PLUS BIT RETAINER BHA 18, KHA 24, P´ 7911, UHE 22 Multi, UHE 28 Multi, BHE 20 Compact, BHE 20 IDR, BHE 22, BHE 24, BHE 26, KHE 26, KHE 26 Contact, KHE 28 and KHE 32 Carbide hammer drill bit + with SDS-plus shank end with UHE 22 Multi, UHE 28 Multi, KHE 26, KHE 26 Contact, KHE 28 and KHE 32 Other tools with SDS-plus shank end with BHE 22, BHE 24, BHE 26 or for hammer drill bits with ratio thread Tools for non-impact work Tools
SDS-PLUS ACCESSORIES Order no. Hard metal hammer drill bit, SDS-plus, 2 cutting edges The slim, chisel-shaped bit head enables fast penetration into the material to be drilled The continuous core reinforcement ensures stability and durability. It enables maximum energy transmission from rotary hammer to drill tip.
SDS-PLUS ACCESSORIES Chisel with SDS-plus shank end Chisel shape Overall length mm Carbide core cutters, M 16 female thread Cutting width Optimised with larger carbide teeth for longer tool life. Higher power efficiency due to stably, thin-walled bit bodyFor concrete and masonry Order no. Pointed chisel, round tip 250 6.30992 Pointed chisel, square tip 250 6.31421 Flat chisel 250 20 6.31420 250 40 6.31425 250 22 6.
SDS-MAX ACCESSORIES ANGLE GRINDERS FOR HAMMERS WITH SDS-MAX BIT RETAINER – Carbide hammer drill bits, SDS-max, 2 cutters Symmetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill. Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening.
SDS-MAX ACCESSORIES Chisel with SDS-max shank end Chisel shape Assortment of chisels with SDS-max shank end Overall length Cutting mm width Order no. Order no. Pointed chisel, round tip Pointed chisel, round tip Pointed chisel, round tip 280 6.23351 400 6.23352 600 6.23358 Flat chisel Flat chisel Flat chisel 280 400 600 25 25 25 6.23353 6.23354 6.23359 400 300 350 50 80 115 6.23355 6.23356 6.23366 SDS-max chisel set (5 piece) Comprising 2 pointed chisels (6.23352), 2 flat chisels (6.
OTHER ACCESSORIES Chisels with hexagon shank end, KW 19 x 82.5 mm (with collar) Diameter mm Overall length mm Order no. 40 45 55 68 80 150 150 150 150 150 6.23301 6.23302 6.23303 6.23304 6.23305 Order no. Anchor-head holder for carbide router bits with ratio female and male thread 6.23299 Ratio threaded peg 6.23027 Chisel shape Overall length mm Cutting width Order no. Pointed chisel Pointed chisel 370 570 Flat chisel Flat chisel 370 570 24 24 6.23442 6.
OTHER ACCESSORIES Integral chucks for rotary hammers Order no. SDS-plus hammer chuck For accessories with SDS-plus shank end (UHE 22, UHE 28 Multi, BHE 26, BHE 26, KHE 26) 6.31920 Quick-action keyless chuck with adapter For accessories with cylindrical shank end (UHE 22, UHE 28 Multi, BHE 24, BHE 26, KHE 26 Contact, KHE 28) Geared chuck with adapter For accessories with cylindrical shank end (for UHE 22, UHE 28 Multi, BHE 24, BHE 26, KHE 26 Contact, KHE 28) 6.
MFE 30 MFX 65 2500 Watt Wall Chaser MFX 65 Standard equipment 3,5 Nm 125 mm 10/17/23/30 mm 0 - 30 mm 8.200 /min 1.400 W 750 W 8.200 /min 3,9 kg 18 Nm 230 mm 3/9/17/29/33/ 37/41 mm 20 - 65 mm 6.600 /min 2.500 W 1.770 W 4.
