Use And Care Manual

3. Battery Charger
Body
Cord
Nameplate
Guide rail
Pilot lamp
Nameplate
Guide rail
Cord
Pilot lamp
<UC18YKSL> <UC18YFSL>
Fig. 4
SPECIFICATIONS
1. Cordless Impact Driver
Model WH18DBFL2
No-load speed 0 – 3,100 /min
Capacity
Small screw 5/32" (M4) – 5/16" (M8)
Ordinary bolt 3/16" (M5) – 5/8" (M16)
High tension bolt 3/16" (M5) – 15/32" (M12)
Tightening torque
Maximum 1,522 in-lbs {172 N∙m 1,754 kgf∙cm}
Tightening is 5/8" (M16) high tension bolt, when fully
charged at 68°F (20°C) temp.
Tightening time: 3 sec.
Bit shank size 1/4" (6.35 mm) Hex.
Battery
Model BSL1815 (1.5 Ah) BSL1830C (3.0 Ah) BSL36A18 (18 V, 5.0 Ah)
Type Li-ion battery
Voltage DC 18 V DC 36 V / 18 V
Weight 2.9 lbs. (1.3 kg) 3.5 lbs. (1.6 kg)
2. Battery Charger
Model UC18YKSL UC18YFSL
Input power source Single phase: AC 120 V 60 Hz
Charging time
(At a temperature of 68°F (20°C))
BSL1815 : Approx. 40 min
BSL1830C : Approx. 90 min
BSL1830C : Approx. 45 min
BSL36A18 : Approx. 75 min
Charging voltage DC 14.4 – 18 V
Charging current DC 2.0 A DC 3.5 A
Weight 0.8 lbs. (0.35 kg) 1.1 lbs. (0.5 kg)
NOTE: The charging time may vary according to temperature and power source voltage.
9
English
0000WH18DBFL2metabo.indb90000WH18DBFL2metabo.indb9 2019/06/1117:00:002019/06/1117:00:00