Use And Care Manual
Maintenance chart
ACTION WHY HOW
Drain air line fi lter daily.
Prevent accumulation of
moisture and dirt.
Open manual petcock.
Keep lubricator fi lled. Keep the Nailer lubricated.
Fill with metabo HPT
pneumatic tool lubricant.
Clean fi lter element and blow
air through fi lter in direction
opposite to normal fl ow daily.
Prevent clogging of fi lter with
dirt.
Follow manufacturer’s
instructions.
Clean magazine and feeder
mechanism.
Prevent a jam. Blow clean daily.
Keep push lever working
properly.
Promote operator safety and
effi cient Nailer operation.
Blow clean daily.
Lubricate the Nailer after
nailing.
Extend the Nailer life.
Supply 5 – 10 drops of
lubricant into the Nailer.
Drain air compressor daily.
Keep the Nailer operated
properly.
Open petcock on air
compressor tank.
22
English
without prior notice.
SERVICE AND REPAIRS
WARNING
● Only service personnel trained
by metabo HPT, distributor or
employer shall repair the Nailer.
● Use only parts supplied or
recommended by metabo HPT for
repair.
All quality Nailers will eventually require
servicing or replacement of parts because of
wear from normal use.
NOTE
Specifi cations are subject to change
without any obligation on the part of
metabo HPT.
000BookNT65MA4(S)USmetabo.indb22000BookNT65MA4(S)USmetabo.indb22 2018/02/0714:38:372018/02/0714:38:37