Manualshelf

User Guide

ManualsBrandsMetabo HPT ManualsFraming NailersCordless Framing Nailer Kit, 18V, Brushless Motor, 2-Inch up to 3-1/2-Inch Clipped & Offset Round Paper Strip Nails, 3.0 Ah Lithium Ion Battery
21222324252627282930
26
English
(3) Install the hook on the other side and securely
fasten with screw.
CLEARING A JAM
If nails are jammed in fi ring head, remove it, and adjust the
nailing in the following order.
CAUTION
●
Remove the battery from the Nailer.
1
Remove the battery from the Nailer.
2
Remove all nails.
3
Remove the M5 bolts with wrench.
3
Do not loosen
these screws
4
Pull magazine away from the fi ring head, and clear
jam.
CAUTION
●
NEVER hit the driver blade.
●
NEVER point the tool at yourself or another
person, to avoid risk of injury by mis-fi ring.
Even if the battery is removed from the nailer,
there is still energy of compressed air remaining
inside.
3
5
Attach the magazine to the injector and tighten with
the M5 bolt.
NOTE
●
In case of frequent jam, contact a metabo HPT
authorized service center.
000BookNR1890DC(S)metabo.indb26000BookNR1890DC(S)metabo.indb26 2020/03/259:52:262020/03/259:52:26