Operating Guide

PROBLEM CHECK METHOD CORRECTION
Skipping nails
Intermittent feed.
Check for proper nails. Use only recommended nails.
Nailer feeder damaged? Replace nail feeder.
Ribbon spring weakend or
damaged?
Replace ribbon spring.
Piston O-ring worn or
damaged?
Contact Hitachi for
replacement.
Nails jam.
Driven nail is bent.
Check for proper nails. Use only recommended nails.
Driven blade worn? Contact Hitachi for
replacement.
Drives properly during normal
operation, but does not drive
fully at faster nailing speeds.
Check inside diameter of air
hose.
Use larger air hose.
19
English
000Book_NP35A_US.indb 19000Book_NP35A_US.indb 19 2009/08/10 15:44:452009/08/10 15:44:45