User Manual

10
English
NAIL SELECTION
WARNING
●
Be sure to use only the genuine HITACHI
nails for the NP35A. The use of any other
nails can result in tool malfunction and/or
nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with
this Nailer.
23 Gauge pin nails
Min. Max.
.024″
(0.6 mm)
.024″
(0.6 mm)
5/8″ (15 mm)
1-3/8″ (35 mm)
ACCESSORIES
WARNING
●
Accessories other than those shown below
can lead to malfunction and resulting
injuries.
STANDARD ACCESSORIES
2
3
4
1
5
1
Eye protection 1
2
Allen wrench for M4 screw 1
3
Nose cap (A) 2
4
Case 1
5
Lubricant oiler 1
OPTIONAL ACCESSORIES ... sold separately
○ Pneumatic tool lubricant
1 oz. (30 cc) oil feeder (Code No. 877153)
4 oz. (120 cc) oil feeder (Code No. 874042)
1 quart (1 ltr) can (Code No. 876212)
NOTE
Accessories are subject to change without any
obligation on the part of HITACHI.
APPLICATIONS
○
Installation of decorated plywood such as baseboards
and edgings in interiors of buildings.
BEFORE OPERATION
Read section titled “SAFETY” (pages 4 – 8).
Make sure of the followings before operation.
WORKING ENVIRONMENT
WARNING
●
No fl ammable gas, liquid or other fl ammable
objects at worksite.
● Clear the area of children or unauthorized
personnel.
AIR SUPPLY
DANGER
● NEVER use reactive
gases or other
bottled gases.
Explosion may occur.
WARNING
●
Never connect Nailer to pressure which
potentially exceeds 200 psi (13.7 bar 14
kgf/cm
2
) if a regulator fails.
● Never use non relieving coupler on Nailer.
000BookNP35AUS.indb10000BookNP35AUS.indb10 2016/01/2216:44:402016/01/2216:44:40