User Manual

English
— 9 —
SPECIFICATIONS
STAPLE SELECTION
WARNING
䢇 Be sure to use only the genuine
HITACHI staples for the N5008AC2,
N5010A. The use of any other staples
can result in tool malfunction and/or
staple breakdown, leading to serious
injuries.
Only staples shown in the Table below can
be driven with this Stapler.
Dimensions of staples for N5008AC2
Operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
2
)
Dimensions 14-3/8" × 10-5/32" × 3"
Length × Height × Width (365 mm × 258 mm × 76 mm)
Weight 4.4 lbs. (2.0 kg)
Staple capacity 150 Staples
.040 ft
3
/cycle at 100 psi
Air consumption
(1.1 ltr/cycle at 6.9 bar)
(1.1 ltr/cycle at 7 kgf/cm
2
)
Dimensions of staples for N5010A
16 Gauge 7/16”
Min. Max.
Crown staple
16 Gauge 1/2”
Min. Max.
Crown staple
ACCESSORIES
WARNING
䢇 Accessories other than those shown
below can lead to malfunction and
resulting injuries.
STANDARD ACCESSORIES
2" (50 mm)
.063"
(1.61 mm)
1"
(25 mm)
.309"
(7.9 mm)
.057"
(1.45 mm)
2" (50 mm)
.386"
(9.8 mm)
.052"
(1.33 mm)
.064"
(1.63 mm)
3/4"
(19 mm)
1
2
1 Eye protection 1
2 Allen wrench for M5 screw 1
01Eng_N5008AC2_US 3/4/09, 18:269