Use And Care Manual

SPECIFICATIONS
1. Cordless Driver Drill
Model DS18DGL
Motor DC motor
No-load
speed
Low 0 – 450 /min
High 0 – 1,250 /min
Capacity
Drilling
Wood (Thickness
11/16 in. (18 mm))
1 – 1/2 in. (38 mm)
(Soft Wood)
Metal (Thickness
1/16 in. (1.6 mm))
1/2 in. (13 mm)
(Mild Steel)
Screw
Driver
Wood screw
#16 × 2 in.
(6.8 mm × 50 mm)
Small screw 1/4 in. (6 mm)
Drill chuck capacity
Maximum gripping
diameter 1/2 in. (13 mm)
Battery
Model BSL1815S / BSL1825
Type Li-ion battery
Voltage DC 18 V
Weight 3.7 lbs. (1.7 kg)
2. Battery Charger
Model UC18YKSL
Input power source Single phase: AC 120 V 60 Hz
Charging time
(At a temperature of 68°F (20°C))
BSL1815S : Approx. 35 min
BSL1825 : Approx. 75 min
Charging voltage DC 14.4 – 18 V
Charging current DC 2.0 A
Weight 0.8 lbs. (0.35 kg)
NOTE: The charging time may vary according to temperature and power source voltage.
10
English
DS18DGL.indb10DS18DGL.indb10 2018/10/0513:48:212018/10/0513:48:21