Specifications

4
®
Index of Contents
5. Unpacking 27
5.1 Visual inspection 27
5.1.1 Checking the equipment and accessories supplied 27
5.2 Positioning limits 27
5.3 Positioning and unpacking 28
5.4 Checking the contents of the pack 28
5.5 Handling 29
5.6 Storing 29
5.6.1 UPS 29
5.6.2 Batteries 29
6. Installation 30
6.1 Safety rules and regulations 30
6.2 Electrical connections 30
6.2.1 Safety recommendations 30
6.2.2 Preliminary operations 31
6.2.3 Earthing 31
6.2.4 Connecting the loads, general notes 31
6.2.5 Installing the ARCHIMOD® BATTERY 31
6.2.6 Protections 34
6.2.7 Configuration: three-phase input/three-phase output 34
6.2.8 Configuration: three-phase input/single-phase output (only UPS Archimod® 20kVA and 40 kVA) 37
6.2.9 Single-phase input/single-phase output connection (only Archimod® 20kVA and 40kVA) 40
6.2.10 Single-phase input/three-phase output connection (only Archimod® 20kVA and 40kVA)
Inverter in the 120° THREE-PHASE mode 43
6.2.11 Single-phase input/three-phase output connection (only Archimod® 20kVA and 40kVA)
Inverter in the THREE INDEPENDENT PHASES mode 44
6.2.12 Wiring 47
6.2.13 Emergency Power Off 47
7. Control panel 49
7.1 “Service Mode” function 50
7.2 Main menu and submenus 50
7.2.1 UPS status 54
7.2.2 UPS settings 56
7.2.3 Power Modules 59
7.2.4 Events 61
7.2.5 Tools 61
7.2.6 Log Out 62
7.2.7 Turning the single output phases on and off 62
7.2.8 Shutting down the UPS Archimod® 62
8. Diagnostics 63
8.1 Luminous and acoustic signals 63
8.2 Messages 65