Specifications

This device is used to manage energy distribution, i.e. it allows to power and

shutdown the devices connected to its four independent powering outputs.

For example, during a power failure, a UPS can transmit a command that shuts

down the least important loads (such as laser printers) so as to provide the critical

systems with as much autonomy as possible.

Once the mains power returns, a command that powers these loads again can be

transmitted by the same UPS.

The 5 leds on the front part allow you to check the main power status and that of each output.

Brackets allowing the device to be installed in 19” rack cabinets are included.

SiteSwitch 4 is available in two di erent versions: SS4 and SS4 AUX.

SiteSwitch 4

This is the high-performance version since it houses a network interface able to receive the commands from the CS121 interface /all

models) that controls the UPS via TCP/IP.

This means that SS4 can be installed near the powered loads and allows a UPS to manage a potentially in nite number of them.

A CS121 SK network interface in the SS4 guarantees autonomous operation, i.e. without receiving commands from a UPS: commands

can be transmitted to the computers (via RCCMD software), powering and shutdowns can be programmed, e-mail transmitted and

environmental sensors controlled through its WEB interface.

It is compatible with the SNMP protocol.

SS4

This is the cost e ective solution. It is controlled by the CS121 and CS121 SK interfaces installed in the UPS via their contact ports

and a connecting cable. It is the ideal solution if it must be installed near the UPS (e.g. inside the same rack cabinet), however, no

more than 15 meters away.

SS4 AUX

Power supply voltage : 230 V / 16 A

Output sockets : 4 x (230 V / 8 A)

Output socket control : internal / CS121 (all models)

Type of management connection : Ethernet 10/100 Mbit/s

Dimensions [L x D x H] : 260 x 180 x 60 mm

Product code : PAI0033

Power supply voltage: : 230 V / 16 A

Output sockets : 4 x (230 V / 8 A)

Output socket control : CS121 / CS121 SK

Type of management connection : RJ11 cable - approx. 5 m (included)

Dimensions [L x D x H] : 260 x 180 x 60 mm

Product code : PAI0034