Specifications

76
This software enables a computer to receive and execute, via the TCP/IP protocol, the following remote commands transmitted by the
UPS management systems:
• Shutdown of the operating system
• Display of pop-up messages
• Execution of customized programs (.COM, .EXE, .BAT, .CMD) with the relative options
All the commands received are recorded in a log  le.
Execution of these commands depends on an authorization control: the commands are only accepted if the UPS that transmitted them
is part of an authorization list.
A “redundancy” list can be created, i.e. a command will only be executed if it has been transmitted by several UPS (e.g. to shutdown
computers with redundant powering on two or more UPS).
The software supports 99% of the operating systems currently available on the market (including the AS/400 systems and virtualization
systems like VMware) and is also available for di erent types of architecture (e.g. Intel, PowerPC, Alpha processors).
Compatible with: UPS Supervisor, CS121 (all models), SiteSwitch 4 (only the SS4 model).
RCCMD
Item code Description
PAI0013 RCCMD multi OS license
PAI0035 Package of 5 RCCMD multi OS licenses
PAI0036 Package of 10 RCCMD multi OS licenses
PAI0037 Package of 25 RCCMD multi OS licenses
PAI0038 Package of 50 RCCMD multi OS licenses
PAI0016 RCCMD license for AS/400 (minimum release: V5R3M0)
• An RCCMD license is required for each computer that needs to be controlled.
• Only the licenses are supplied: the software can be downloaded from the Internet.
Notes
ACCESSORIES
CONTROL AND COMMUNICATION