Specifications

72
Environmental monitoring
There are applications which require UPS monitoring and environmental monitoring too.
With CS121 / CS121 SK it is possible to monitor temperature and humidity using special sensors. Within environmental monitoring is also possible
set treshold values and program relevant job to execute as sending e-mail, pop-up message, remote computer command, shutdowns, ecc.
If more than one sensor is required, a special device allowing connection up to 8 units can be installed between the CS121 interface and the
sensors themselves.
The historic data of the trend of the entities measured by the sensors are memorized in a dedicated log  le and can be displayed in graphic form
or exported for successive analysis and  ling.
The system controls also the status of digital inputs (e.g. microswitches that open doors or fault indicator contacts of conditioning systems) and
hardware devices like indicator lights or sirens can be programmed: here again, e-mail messages can be transmitted or commands executed on
remote computers.
Monitoring of several sensors
Custom sensors
UPS
Temperature sensors
Temperature/humidity
sensors
CS121 / CS121 SK Sensor Manager
Monitoring of one single sensor
Temperature or
temperature/humidity
sensor
CS121 / CS121 SKUPS
Monitoraggio ingerssi digitali e comando dispositivi hardware
input
Optoisolated
contact out
Smoke detectors
UPS
Air conditioning
Fire- ghting systems
CS121 / CS121 SK
input
output
output
The following products are available for this type of system:
• CS121 / CS121 SK : network interface
• SM_T_COM : temperature sensor for CS121 / CS121 SK
• SM_T_H_COM : temperature and humidity sensor for CS121 / CS121 SK
• SensorManager : manager of sensors for CS121 / CS121 SK
• SM_T : temperature sensor for SensorManager
• SM_T_H : temperature and humidity sensor for SensorManager
ACCESSORIES