Specifications

30
TRIMOD
TECHNICAL FEATURES
MODEL TRIMOD
®
8 TRIMOD
®
10 TRIMOD
®
16 TRIMOD
®
20
GENERAL CHARACTERISTICS
Power Rating 2,7 kVA 3,4 kVA 2,7 kVA 3,4 kVA
Technology On Line Double Conversion VFI-SS-111
System Design Modular, scalable & redundant UPS system in a single cabinet
INPUT CHARACTERISTICS
Input Connections
230V 1PH+N,400V 3PH +N 230V 1PH+N,400V 3PH +N 230V 1PH+N,400V 3PH +N 230V 1PH+N,400V 3PH +N
Input Frequency 50-60 Hz ±2% Autosensing
Input Voltage Range
400V +15%/-20%
230V +15%/-20%
400V +15%/-20%
230V +15%/-20%
400V +15%/-20%
230V +15%/-20%
400V +15%/-20%
230V +15%/-20%
Input Current Distortion 3%
Genset Compatibility
TRIMOD
®
can be set up so as to achieve synchronism between the input and output frequency
even for wider frequency ranges, ±14%.
Input Power Factor > 0.99
OUTPUT CHARACTERISTICS
Rated Power 8kVA/6,4kW 10kVA/8kW 16kVA/12,8kW 20kVA/16kW
Rated Output Voltage
230V, 400V 3F +N 230V, 400V 3F +N 230V, 400V 3F +N 230V, 400V 3F +N
Efficiency at Full Load 95%
Output Frequency
(nominal) 50/60 Hz user adjustable ±1 Hz
Crest Factor 1:3,5
Output Voltage Tolerance ±1%
Overload Operation 100 seconds @ 125% and 30 seconds @ 150%
Efficiency in Eco Mode Status 99%
Bypass Automatic by-pass & Maintenance by-pass
BATTERY CHARACTERISTICS
Battery Module Battery modules are designed to be easily placed into the rack (Plug n’ play)
Battery Type/String Voltage VRLA - AGM/ 240 Vdc (Internal redundant strings)
Battery Runtime Configurable, Scalable both internal and with additional battery cabinets
Battery Recharge Smart Charger technology. Advanced three charging steps
COMMUNICATIONS & MANAGEMENT
LCD Display
4 lines by 20 characters for real time monitoring of UPS status, 4 menu-driven interface buttons,
4 status at a glance LEDs
Communication Ports Two RS232 Serial Ports, one Port with logic contacts, four outputs with clean contacts
Emergency Power Off (EPO) Yes
Remote Mangement Available
PHYSICAL CHARACTERISTICS
Height/Widht/Depht
1.345 mm/414 mm/628 mm
Installed Power Modules 3 3 6 6
Installable Battery Modules Up to 12 Up to 12 Up to 8 Up to 8
Net Weight 110 Kg 110 Kg 130 Kg 130 Kg
ENVIROMENTAL SPECIFICATIONS
Temperature/Humidity 0 - 40 °C / 20 - 80%
Audible Noise at 1 meter 46 dBA 46 dBA 46 dBA 46 dBA
Heat Dissipation (full load) 1.091 BTU/h 1.364 BTU/h 2.183 BTU/h 2.729 BTU/h
CERTIFICATIONS
Certifications EN62040-2, EN/IEC 62040-3, EN/IEC 62040-1-1
Standard Warranty Repair or replace 2 year
SERVICE
Installation User capable, Modular construction plus power rack and battery installation of the “plug and play”
Maintenance User capable, optional factory service available
Serviceability Features Advanced Diagnostic features on LCD panel