Specifications

17
SERVICE CONTINUITY
Operation continuity, also in case of fault of one of the module, is ensured without interruption or switching, thanks to the parallel load sharing.
All the cards contribute to powering the load.
The degree of redundancy may be set using the software or the display. This enables receiving noti cations when absorption increases
compromise the redundancy but not the operation.
NORMAL OPERATION
With the correct sizing of the power modules, it is possible to
split the load so that the modules do not operate at 100% of
their power.
OPERATION IN CASE OF FAULT
If one of the modules becomes faulty, the others continue to
power the load, sharing the power that previously was supplied
by the faulty module.
MODULARITY= REDUNDANCY