Owner's Manual
13
Indicators:
Playback Mode:
CD
BT (Bluetooth)
AUX
FM
AM
“Cd” will appear on the display
“bt” will appear on the display
"AUX" will appear on the display
“FM” will appear on the display
"AM" will appear on the display
4. During playback,
Turn the VOLUME Control Knob on the unit to adjust volume level as desired.
Turn t he DBBS (Dynamic Bass Boost System) to enhance the bass of the sound
to the speakers
5. Press the DIMMER Button on the main unit or remote control repeatedly to set the
brightness level of display.
6. When finished listening, press the POWER Button on the unit or remote control to
turn back to standby mode.
CLOCK:
To set or reset the time:
In Standby mode, press and holding the TIME SET Button on main unit or
remote control, time on display will blinking. Then:
OPERATION
GENERAL OPERATION:
1. Connect the unit to AC power as previously instructed. The unit will enter to
standby mode automatically and the LCD Display will illuminate.
2. Press the POWER Button on the main unit or remote control to turn on the unit
from standby mode. The POWER Indicator will illuminate.
3. Press the FUNCTION Button on the main unit or remote control repeatedly to
switch to desired playback mode. The correspondent indicator will appear on
the display with your selection (see list below):
Press the or Button on the main unit or remote control to set hour.
(Make sure the PM Indicator appearing on the display if the time is PM)
Press the TIME SET Button on the main unit or remote control again on the
unit to set minute.
Press the or
Button on the main unit or remote control to set minute.
When finished settings, release the TIME SET Button on the main unit or
remote control to save the settings and exit, time on display will stop
blinking.