User manual

3.Web-basedInterface
38NIC990lUserManual
Event Recording Settings
This interface shows up at the bottom of this page only when the Event Recording radio button is
selected.
The scheduled recording is triggered by alarm-in or motion detection according to the check boxes
in the Recording Settings you have ticked. Please nish the congurations as follows.

Pre-Recording: Set the number of images to be recorded before an event (alarm or motion
detection) occurs. Images of the moment when an event occurs are not included. Options
including 0, 3, 5, 10 frames are selectable by clicking the drop-down menu.

Post-Recording: Set the number of images to be recorded immediately after an event (alarm
or motion detection) occurs. Images at the moment when an event occurs are not included.
Options including 0, 3, 5, 10, 20, 60, 120 frames are selectable by click the drp-down menu.

Recording Cycle: Set the time interval for recording.

Record File Name: Specify the le name for les to be stored on the server.

Server Path: Type in the elds with data path where the data is to be stored on the server.
Server Settings - Server 1/2
Please follow your FTP settings to set up FTP server name, Login ID, Password, FTP port number, FTP
mode, and FTP connecting method.

FTP server name: Input a server name or address.

Login ID: Limited only to users who have authority to access the server.

Password: Input the registered password associated with Login ID.

Password (Conrm): Re-enter the password.

FTP Port Number: Set ‘21’ by default.

FTP Mode:
• PORT mode: This mode is for most FTP applications.
• PASV mode: This mode is for the camera’s network environment that is behind a rewall.
FTP Connecting Method: