User manual

3.Web-basedInterface
NIC990lUserManual37

Scheduled Recording: By clicking the Scheduled Recording radio button, the Schedule
Settings interface which needs to be congured as a scheduled recording plan will then be
shown at the bottom of the screen.

Event Recording: By clicking this radio button, the Event Recording Settings will then be
shown at the bottom of the screen.
• Alarm In: This check box is available only when any of the six Alarm In items is set at ON (see
the External Alarms section). Tick the check box to enable the event recording if an alarm
input occurs.
• Motion Detection: This check box is available only when the Motion Detection function
is set at ON (see the External Alarms section). Tick the check box to enable the event
recording if a motion detection event occurs.

OFF: Default setting.
Schedule Settings
This interface shows up at the bottom of this page only when the Scheduled Recording radio
button is selected.

Recording Schedule: Click radio buttons to determine OFF, All Day, Schedule 1 or Schedule 2
from the recording schedule table.

Recording Cycle: Set a time interval for recording images.

Recording File Name: Specify the le name for les to be stored on the server.

Server Path: Type in the elds with data path where the data is to be stored on the server.