User manual

3.Web-basedInterface
32NIC990lUserManual
When you click SD Card Recording on the left-hand menu, a message dialog box will pop up if the
stream mode is set on H264 (1080p). To start conguring SD Card recording users are supposed to
set stream mode on options other than H264 (1080p). Please refer to the Codec section for further
details.
Recording Settings
Trigger Mode: Congure the triger modes to store image les according to the scheduled recording
plan or the moment an event occurs.

Scheduled Recording: By clicking the Scheduled Recording radio button, the Schedule
Settings interface which needs to be congured as a scheduled recording plan will then be
shown at the bottom of the screen.

Event Recording: By clicking this radio button, the Event Recording Settings will then be
shown at the bottom of the screen.
• Alarm In: This check box is available only when any of the six Alarm In items is set at ON (see
the External Alarms section). Tick the check box to enable the event recording if an alarm
input occurs.
• Motion Detection: This check box is available only when the Motion Detection function
is set at ON (see the External Alarms section). Tick the check box to enable the event
recording if a motion detection event occurs.

OFF: Default setting.