User manual

 RS485 (Yellow)

 GND: Ground (electricity) in electrical circuits

 Alarm In 1 (Red) & 2 (Brown): Connects to devices that trigger alarm signals. Up to two 2 input

devices can be connected.

1.3.3 Controls

 Reset: use an appropriate tool to press the button for few seconds to reset the camera

Hold for 5 seconds to reboot camera. Hold longer than 5 seconds to load default settings.

 Zoom: Adjust the zoom control for desired image view.

 Focus: Adjust the focus for optimum picture sharpness.

Focus (Far/Near)

Zoom (Tele/Wide)