User manual

1.3 Physical Descriptions

1.3.1 Dimension

1.3.2 Connectors

 Power In (Red+/Black-): Connects to DC 12V / AC 24V power supply. If you are to use power

from Ethernet connection, this connector is not used when the power is provided by PoE.

Note: Camera with heater requires DC24V/ AC24V power supply.

 RJ-45 Ethernet Connector: Connects to the LAN port of a standard 10Base/100Base-TX device,

e.g., hub, switch or router.

 BNC: Connects to composite video in connector of a monitor. Note that when connecting the

camera to an analog monitor, the camera must be connected to DC 12V / AC 24V power supply.

 Audio Out (Green): Connects to speaker.

 Audio In (Red): Connects to an external microphone.

 Alarm Out (Orange): Connects to device that responds to alarm signals, such as buzzers or

lights.

 Reserved (Green)