User manual

4.2.8 ePTZ

Using the ePTZ function, you can use the pan, tile and zoom controls to steer the camera to a desired

position and focus on desired close-up areas, without moving the camera physically.

To use the ePTZ function:

1. On the Image > Codec page, make sure one of the streams are configured to use MJPEG codec and

D1 resolution.

2. On the main screen, a PTZ button will appear. After you click the ePTZ button, an ePTZ control panel

will appear where you can click the corresponding indicators to perform desired operations:

 To zoom in/out: Click the +/- indicator repeatedly to zoom in/out the live view image.

 To pan left/right: Click the left/right indicator to pan the viewing area. The pan function does not

work if the video is not zoomed-in (no zoom status).

 To tilt up/down: Click the up/down indicator to tilt the viewing area. The tilt function does not

work if the video is not zoomed-in (no zoom status).

 To preset to home: Click the home indicator and the image will return to the original view.