User manual
4. Web-based Interface
NDF821/NDF821E l User Manual 37
DST: Tick the Automatically Adjust for Daylight Saving Time Changes check box to apply
the daylight saving time and users are supposed to congure the start/end time period by clicking
the drop-down menus respectively.
When nished, click Save to have the conguration take effect.
4.3.5 RTSP
RTSP is a standard for establishing and controlling sessions for streaming data over the web. If you
want to allow third-party devices or software to access video/audio streams from the IP camera over
the network, you must congure the RTSP ports. You can provide up to 6 streams according to the
specic codec mode with different RTSP port. And when nished, click Save to have the conguration
take effect.
To use an RTSP player to access the camera’s streams, you have to use correct RTSP URL to request
the streams. Refer to the table below for RTSP URLs:
Stream URL
MJPEG Primary rtsp://192.168.1.30:8555/mjpeg
MJPEG Third rtsp://192.168.1.30:8558/mjpeg
H.264 Primary rtsp://192.168.1.30:8557/h264
H.264 Secondary rtsp://192.168.1.30:8556/h264
MPEG4 Primary rtsp://192.168.1.30:554/mpeg4
MPEG4 Secondary rtsp://192.168.1.30:8554/mpeg4
*Replace the IP address and the port number with the camera’s settings if otherwise congured.