User manual

4. Web-based Interface
36 NDF821/NDF821E l User Manual
4.3.3 SMTP
To enable the camera to send you email notications when an alarm is triggered, you need to specify
an SMTP server to send the emails.

My Server Requires Authorization: If your SMTP server requires authorization to send emails,
enable this option.

SMTP Server IP: Enter the IP address of the SMTP server.

User Name: Enter the user name to log on to the SMTP server.

Password: Enter the password to log on to the SMTP server.

Sender: Enter the email address to be shown as the sender of the notication email.

Receiver: Enter the email address to which the notication email is sent.

When nished, click Save to have the conguration take effect.
4.3.4 NTP
If you want the camera to synchronize its time clock with an NTP (Network Time Protocol) sever,
congure the NTP server settings here.

NTP Server: Enter the IP address or the domain name of the NTP server to synchronize with.

Time Zone: Select a time zone in which the camera is located.