User manual

4. Web-based Interface
22 NDF821/NDF821E l User Manual
Camera Name Settings

Enter a descriptive name of the camera. Note that if you want to make the camera ONVIF
compliant (see Network > ONVIF ), no space is allowed in the camera name.
H.264 Codec Settings

Resolution: Click the drop-down menu to choose a resolution for the video.

Bit Rate: According to your bandwidth, specify a value for data transmission rate (kbps). Higher
value gets higher video quality but consumes more bandwidth.

Frame Rate: Choose the intended frame rate, i.e., the number of frames to transmit per second.
MPEG4 Codec Settings

Resolution: Click the drop-down menu to choose a resolution for the video.

Bit Rate: According to your bandwidth, specify a value for data transmission rate (kbps). Higher
value gets higher video quality but consumes more bandwidth.

Frame Rate: Choose the intended frame rate, i.e., the number of frames to transmit per second.
MJPEG Codec Settings

Resolution: Click the drop-down menu to choose a resolution for the video.

Quality: Set the image’s quality as High, Normal or Low.

Frame Rate: Choose the intended frame rate, i.e., the number of frames to transmit per second.
TipCautionWarning
Note
1. Live View uses the MJPEG codec. If no streaming is using MJPEG, it will result in no video for Live
View.
2. If MJPEG is selected for both the primary stream and the third stream, Live View will always
display video using the third stream codec settings.