User manual

2. Camera Installation
NDF821/NDF821E l User Manual 11
2.5 Adjusting Camera Angle
Users can check the monitored view by wiring the RCA jack to a monitor. With an external monitor
connected, you can adjust pan and tilt angles of the camera for appropriate or better view.
Before making adjustments to the lens, please remove the inner liner rst.
RCA Jack for
Composite Video Output
Pan Adjustment: Rotate the lens base to adjust the horizontal angle.
Tilt Adjustment: Tilt the lens base to adjust the vertical angle.
Pan Angle = about 355 degrees
Tilt Angle = 90 degrees
Horizontal rotation: Rotate the dome base to adjust the horizontal position. Do not turn the base
more than 355° as this may cause the internal cables to twist and disconnect or break.