User Guide

MESHTEK-H52E
ilumi solutions, inc. www.ilumisolutions.com http://www.ilumi.co/ P a g e 6 | 13
2. GENERAL SPECIFICATIONS
Table 2 provides the general specifications for the module and current consumption.
Table 2: ELECTRICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Description
Min
Nom
Max
Notes
VDD - Supply Voltage
1.7V
3.0V
3.6V
Operating Temperature Range
-40 °C
85 °C
ESD - Human Body Model Class 2
4 kV
Built-in Crystal Frequency
32 MHz
Crystal Frequency Tolerance
+/- 10ppm
Reset pin time for successful reset
60 msec
Radio Operating Frequencies
2.402GHz 2.480 GHz
Radio On-Air Data Rate
1 Mbps
2 Mbps
Radio Output Power
+19dBm
RF output power
configured to +19dBm
using external PA in
continuous TX Mode
Receiver Sensitivity @ BLE Mode
-96 dBm
Ideal transmitter
Radio RSSI Accuracy
+/- 2 dB
UART Baud Rate
1000 kbps
SPI Bit Rate
0.125 Mbps
8 Mbps
TWI Bit Rate
100 kbps
400 kbps
Analog-to-Digital Converter (ADC)
Range
0
VDD
8/10/12-bit ADC
VIH – Input High Voltage
0.7 * VDD
VDD
VIL – Input Low Voltage
VSS
0.3 * VDD
VOH – Output High Voltage
VDD – 0.4
VDD
VOL – Output Low Voltage
VSS
VSS + 0.4
Output standard drive current
20 mA
Pull-up resistance / Pull-down
resistance
11k
13k
16k
Transmit Current
90mA
+19dBm output Power
Receive Current
24.8mA
Radio RX Active
System ON, No RAM retention,
Wake on any event
1.2uA
System ON, Full RAM retention,
Wake on any event
1.5uA