View the online video to start setup www Need technical assistance? If you need any help, our technical specialists are ready to help 24 hours a day. Self-help Q&A asl shoeshines.
nH LS To set up, download the My Mesh app for IOS and Android. The app will walk you through the setup. Download My Mesh for mobile device, go to: wan 4 Search in App Store or Google Play. Download My Mesh app i Or scan the GR code to 4 download.
Conn act your mobile phone to the default WIFI. WIFI name and password are printed on the bottom label of the man mesh point. Nita: Tha default Wil password printed on the label is case sensitive. Having trouble? If you did not see the default WIFI on your mobile phone, try to disable phone WiFi and re-enable it.
After your mobile phone Is connected to the default WIFI, go to the app and Walt for a few seconds. Tap Setup button to start. Your connection type should be detected automatically. If not, see page 10.
Name your personal WIFI name and password to replace the default. Tap OK and wait for a while, now your main mesh point setup is complete.
Mesh Force M3 Dot is designed to extend the range. You can add up to 8 dots, each dot can fulfill 1-2 rooms coverage. Simply plug your M3 Dot and Walt for about 1 minute until the Indicator turns dolls green. It will pale with your man mesh point automatically. If not, go to the app, Settings — Add a Mesh, scan the QR code to add manually. Note * Place mesh points within 10 meters or 2 rooms away between each other. Keep away from microwave oven or refrigerator.
Click #: on the homepage up-right corner, register and sign in by Email, or Google, Facebook, Twitter account. @ To add family members manage the mesh WiFi, go to Settings Account Authorization. Type in his or her ID displayed in the profile page. The family members you want to add must register a My Mash account. + Account authorization feature Is visible for WIFI admin only.
If you need to reset the mesh, use a sharp item (like pen) press the RST button for 10 seconds, until the LED indicator blinks green rapidly. LED Status Take action Green Sold Interment connection ls good. Green Pulses Product is ready ta setup Connect WIFI, go to the App snd setup the Fah tk 8 scion pots, go to the. Yellow Solid Inset connections far Claps closer ta the main mesh point Red Sol Sat up Is galled of time out Go to the App check ardor message, reset the point to start over.
FE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuer to part 1 of the FCC Rules, Tess limits are designed to provide reasonable protection against harmful Interference In a residential Installation. This equipment generates, uses and can radiate redo frequency energy and, if not Installed and used In accordance with the Instructions, mey cause harmful interference to radio communications.
