Instructions / Assembly

13
02
1.glass roof
2.speaker
3.side glass body
4.mirror
5.glass rock
6.hot/cold mixer
7.spuarejet
8.steam outlet
9.glass back body
10.drainage
11.top lamp
12.top shower
13.exhaust fan
14.ozone
15.wall lamp
16.hand held shower
17.control panel
18.shift volve
19.side glass body
20.
21.seat
22.glass back body
23.tray
Aluminium board
1
2
3
4
5
6
7
8
9
10
22
12
13
14
15
16
17
18
19
20
21
11
23
WS-300/A
300/300A STRUCTURE SKETCH
(Other models can refer to this model)
(II) Alarm function
when the machine is turned on , touch the button 3seconds on the panel to turn
on alarm function, the screen showing ,meanwhile ,turn off steam function
and radio function , and turn on fan function and lamp function .The speaker will be
sound the alarm .After touch the button turn off the alarm will relief the alarm.
(II) Lamp function
When the machine is turned on, touch the button on the touch panel to turn on/off
the ceiling lamp.
(III) Fan function
When the machine is turned on, touch the button on the touch panel to turn on/off
the fan. When the fan is turned on, the fan indicate will illuminate simultaneously.
(IV) Radio function
1、 When the machine is turned on, touch the button on the touch panel to turn
on/off the radio function. When the radio function is turned on, the radio frequency
will be displayed on the screen, such as .
2、 Touch the button on the touch panel to go to the frequency tuning mode, and
the icon will flicker on the screen. Press the button or to tune the radio
frequency. Touch and hold the button to store the current frequency, and the
currently stored frequency channel will be displayed on the screen, such as .
3、 When the radio is turned on, touch the button to swap the frequency channels,
and the range of frequency channels is from 1 to 8.
4、Under the radio status, touch the button on the touch panel to go to the volume
adjustment mode, and the range of adjustment is from 1 to 15, and the volume will be
displayed on the screen during adjustment, such as .
(V) Steam function
1、When the machine is turned on, touch the button on the touch panel to turn
on/off the steam function. When the steam function is started, the steam function
indicator will illuminate. After the steam function is enabled, the default set time for
steam is 45 minutes, and the default temperature is 100F.
2、When the steam function is started, touch the button on the touch panel to go
to the steam setting mode. If the icon flickers on the screen, such as , it enters
the steam time setting status, and the number displayed is the remaining time for
steam operation. Touch the button again to swap to the steam temperature setting
status, and the icon flickers on the screen, such as , and the number displayed
is the steam temperature setting value.