Use and Care Manual

QUICK START
Before proceeding, make sure all items below are included.
If any items are missing, contact ME S A SAF E CO M PANY Customer Care :
800.490.5624 [Monday thru Friday 7AM - 4PM/PST ]
1
Inser t 4AA Batteries [included] into the External Power Pack [included]
2
Plug the External Power Pack into the External Power Jack. See figure A
3
Allow the lock to power up: [[ ALREADY ]] will appear
4
Enter: #1234# or #123456#
5
You will hear a “Click” to indicate that the safe is unlocked.
6
Turn the handle clockwise within 5 seconds of unlocking to open the door
7
Inser t 4AA Batteries in the batter y compartment
8
To lock your safe, close the door & turn the handle
back to the locked position
9
Make sure your safe is locked & secure before walking away!
If you accidently enter a wrong number, press
*
to delete it
Valid code : LCD will display [[ OPEN ]]
Invalid code : LCD will display [[ Error ]]
WRONG CODE ALARM
Enter 3 wrong codes & it will trigger the Wrong Code Alarm
To turn the alarm off immediately, you must enter a valid code.
Example : 1234#
If a valid code is not entered the alarm will turn off 1 minute after the
last wrong code entered
EMERGENCY KEY
IMPORTAN T : Do not store the emergency keys inside the safe!
If the batteries die or you lose your code, use the emergency key
[2 keys included]
1
Inser t a pin or similar item into the Access Hole:
Located on the bottom edge of keypad
2
Gently push the pin up to release the emergenc y key cover
3
The emergency cover will losen so you can remove it
4
Inser t the emergency key & turn it counter-clockwise
5
Turn the handle to open the door
WA R NING : Do not force the emergency key cover back in place.
If the cover does not re-attach easily it may be upside down.
If you happen to misplace your emergency keys or need to order extra keys,
see backside of manual for details
PG.2
|
MF-SERIES ELECTRONIC LOCK INSTRUCTIONS