Use and Care Manual

Slot #3 & #4 Lock-Out Period
Input a number 00-99 to set the length of the Lock-Out Period
Example : For 5 mintues enter 0 in Slot #3 & 5 in Slot #4
Slot #5 Override Function [Code & Card]
Input 0 to disable the Override Function
Input 1 to use the Override Code entr y only, disables the Override Card
Input 2 to use the Override Card entry only, disables the Override Code
Input 3 to use the Override Code & Card together. Input the Override Code
then swipe O verride Card
Input 4 to use either the Override Code or the Override Card
Slot #6 Unused Slot
Input 0 if not already entered. This slot does not disable or activate any
functions
Input:
#
to confirm the 1
st
set of Lock Settings & [[ GOOD ]] will appear on
the display
SETTING THE DATE & TIME
NOTE : You will only need to set the date & time to use the Lock Opening
Records function. The safe must be in the unlocked postion.
1
Input:
*
-
*
; [[ PROG ]] will appear on the display
2
Input: 0 5 5 2 6 1
- #
; [[ DAT E ]] will appear on the display followed by a
6-digit number
The 6-digit number represents the year - month - day
Example: December 1, 2013 = 131201
3
Slot #1 & #2 :
Enter the Year
4
Slot #3 & #4 :
Enter the Month
5
Slot #5 & #6 :
Enter the Day
7
Input:
#
to confirm the date setting & move on to the clock
The 6-digit number represents the hour - minute - second
When adjusting the hour, you will need to use military time
[24-hr rotation]
Example: 7:25:59am = 072559
8
Slot #1 & #2 :
Enter the Hour
MH-SERIES ELECTRONIC LOCK INSTRUCTIONS
|
PG.7
1 3 1 2 0 1
0 7 2 5 5 9