Use and Care Manual
OPENING YOUR SAFE [For the first time]
Using Personal Code
1
To unlock the safe: Enter your 3-6 digit code; [[ OPENED ]] will appear on
the display & the safe will unlock
2
To lock the safe: Enter your 3-6 digit code then input
#
;
[[ CLOSED ]] will
appear on the display & the safe will be locked
This is a standard hotel room configuration lock. User sets new code
every time the safe is used [ The code you use to unlock the safe is the code
you use to lock the safe. Once the safe is in the unlocked position, the safe
will reset itself ready for any code]
Use
*
to delete numbers that appear on the display. If
*
is entered
before your code, a [[
-
]] will appear rather than the number as a security
feature
Using a Credit Card
[Any card with a magnetic stip]
1
To unlock the safe: Slide your credit card firmly from right to left with the
magnetic stip down; [[ OPENED ]] will appear on the display & the safe will be
locked
2
To lock the safe: Slide your credit card firmly from right to left with the
magnetic stip down; [[ CLOSED ]] will appear on the display & the safe will be
locked
This is a standard hotel room configuration lock. User sets new card every
time the safe is used. [ The card you use to unlock the safe is the card you
use to lock the safe. Once the safe is in the unlocked position, the safe will
reset itself ready for any card]
IMPORTANT : Swipe your card firmly & evenly from right to left. If an
incorrect direction or swiping speed too fast or too slow, [[ ERROR ]] or
[[ AGAIN ]] will appear on the display. You will need to swipe your card
again. The card to unlock the safe should be the same as the card to lock
the safe. If not, [[ E-CARD ]] (error card) will appear on the display.
LOCKOUT PENALTY
When the safe is in the locked position [[ E-Code ]] or [[ E-Card ]] will appear
on the display after an invalid entry.
If an incorrect code or card is used 4 consecutive times & [[ E-Code ]] or [[
E-Card ]] appeared on the display after every incorrect entr y, the safe will
go into a lock-out period of 15 minutes. During the period, when pressing
a button on the keypad, [[ HOLD## ]] will appear on the display. The ##
represent the time that is remaining in the lock-out period
MH-SERIES
ELECTRONIC LOCK INSTRUCTIONS
|
PG.3