Installation Guide

1 check if power and cold/hot water switch be turn on or be turn off each time
before use this product.
2 check if power of electronic leakage device be get through or not.
Checking way:
Press testing button, light of power be off, press button of restart then light of
power be on.It is not being what mentioned above after operated step by
step,then that shows the electronic protection device out off control or there is
something wrong with the electronic leakage device,so should ask
professional to check and maintain the product.
3 Turn off the main power of control panel after stop usage. The plug of power
should be pull out because only turn off all the functions of control panel that
is not stop the power.
4 People with hypertension or drunk are not allowed to have sauna steam bath.
5 Children should have sauna steam bath under adult's instruction.
6 Please don't shut the finger in the door in order to be hurt when get into the
steam room.
7 In order to be tripped and fell down, pay more attention when get into the
steam room.
8 keep clean of the tray in order to be tripped and fell down.
9 Pay attention to the steam sprayer and water tank drainage, they are in high
temperature while working.
Get through power turn on on the screen of control panel.Top light be
on,screen lighting, showing temperature and logo of lighting after within 3-6
seconds being data of self-checking,meanwhile power on other functions,press
this button again to power off all functions but that is not cut the power.
m
0
C
MEMMEM
STST
MHzMHz
0
C
MEMMEM
STST
MHzMHz
STEP 5
STEP 6