Installation Guide
Press turn on top lamp and wall lamp at the same time. It showing
corresponding logos,press the button again to turn off.
Press to turn on steam function,it showing steam logo,water tank
will fill water into automatically and will produce steam within one
minute. Steam function don't work without water in water tank,and logo
flashing will be show in the screen.There is an normal phenomenon that it
will produce steam again when steam stop several minutes after working
in a certain time.Press this button again to turn off steam function.
Press into time setting function,45 minutes will be set by
system,then press to up and down the timing of steam
adjusted, the range can be 5 to 60 minutes or work lasting.steam start to be
count down after setting time,steam will be stop working automatically
when it is count down to zero.
Press into temperature setting,there showing the logo of steam and
the temperature will be set for 45 minutes by system, press
into up and down the temperature adjustment, the range is 30 to 60 degree.
The steam will be stop automatically when the inside temperature will
reach to the setting temperature.
0
C
m m
m
0
C
Chain wheel of glass door
Plastic pad
STEP 3
STEP 4