User's Manual

VP Essentials Sensor User Manual (Rev. A) 13
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: [phone]
monitoring.mesalabs.com
[e-mail]
7-3 VP Essentials Sensor – Mounting Holes
Connect the probes. *Note: Route wires/cables away from the sensor to avoid RF interference issues.
7.4 Startup
The sensor comes from the factory in a deep sleep state. To wake up the sensor, press the button 3
times within 5 seconds. The LED is does a quick flash. Refer to the section 6.1 User Interface for
information about locating the push button.
7.5 Configuring
7.5.1 Connect Configuration Cable (Phono Stereo Connector)
7-5-1 VP Essentials Sensor Top Side View Showing Configuration Port and Cable
configuration port
configuration cable