User's Manual

VP Essentials Sensor User Manual (Rev. A) 11
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: [phone]
monitoring.mesalabs.com
[e-mail]
7.0 Installing and Configuring
7.1 Opening Enclosure
7-1 VP Essentials Sensor – Opening Enclosure
To remove the top enclosure, remove the enclosure screw using a small Philips screwdriver. Take a
small flat head screwdriver and insert it in the pry slot. Pry the top and bottom enclosures apart and
then remove the top part of the enclosure.
7-1-1 VP Essentials Sensor – Opening Enclosure
To put the sensor back together, place the bottom of top enclosure and line up with the bottom portion
of the top enclosure. Rotate the top enclosure (hinged at the bottom of the bottom enclosure) until the
top “snaps” into the bottom enclosure. Insert the screw to secure the top and the bottom together.
Enclosure Screw
Pry
Slot