Owner`s manual

PAGE 3
FrONT PANeL CONTrOLS (Continued)
POWER ON: (Continued)
Never remove any of the power cords terminals. All three terminals of the A.C. power cord must be con-
nected and always check that the power receptacle has the proper voltage present. Also, make sure that the power cord is inserted all the
way in when connecting to a power receptacle.
STANDBY:
Perfect for set breaks...the STANDBY switch also serves an even more important purpose. In the standby position the
tubes are at idle so that during power up they may have a chance to warm up before being put to use.
Before the power is switched on, make sure the STANDBY switch is in the standby position. And as men-
tioned above, wait at least 30 seconds before changing to the ON position.
ON
POWER
ON
STANDBY
PRESENCE A
PRESENCE B
CHANNEL A
CHANNEL B
REST AREA