Owner`s manual

PAGE 11
STANDBY:
Perfect for set breaks... this toggle switch also serves an even more important purpose. In the Standby position the
tubes are at idle so that during power up they may warm up before being put to use. Before Power is switched on make sure the
STANDBY switch is in the Standby position.
Wait at least 30 seconds and then flip the STANDBY switch to the ON position. This prevents tube problems
and increases their toneful life substantially.
Now that we have reviewed the features and controls of the Front Panel and you have a handle on how they interact to achieve the
sound you want, let’s move to the Rear Panel and cover the features found there.
STANDBY
ON
POWER OFF
TWEED
ON
FRONT PANEL: Controls & Features (Continued)
REST AREA