User's Manual

Install the AP300

AP1000 Beta Test

Additional Equipment

A power source is needed to power the AP300. See Determine Power Requirements.

Install the AP300

Select a Location

Attach the Provided Antennas

Install the Remote Antenna Mount (optional)

Install External ACC-ANT-MIMO-MNT Antenna with Three Connectors (optional)

Install Remote ACC-ANT-6ABGN-24 Antenna with Six Connectors (optional)

Install Antennas With One Connector (optional)

Install the Access Point

Select a Location

All AP300 interconnected equipment, including the associated LAN connection, must be contained

within the same building. In addition, the AP300 location should meet the following conditions:

Vertical mounting on sheetrock

 Two #6 x 1" screws

 Two #4-6 x 7/8” ribbed plastic wall anchors

 Mounting bracket

Horizontal mounting below a

hanging ceiling

 Two caddy fasteners

 Two plastic spacers

 Two keps nuts (with attached lock washer)

 Mounting bracket

Using existing third party

brackets

 Use included shoulder screws

Mounting above a ceiling tile

 Two T-rail clips

 One T-box hanger

 One bracket mounting clip

 Mounting bracket

Installation Type Items Required