User's Manual

© 2008 Meru Networks, Inc. Installing the AP300 17
Figure 7: AP310 Antennas 1-3
The following antenna connections are used during operation of the AP310.
Table 6: Antenna Use for AP310 (Single Radio Unit)
The attached antennas must be the same model; if you replace one antenna, replace them all.
Attach the antennas to the connectors on the AP300 (see Figure 8). Rotate the knurled ring at the base
of the antenna clockwise to attach the antenna. The ring should be finger-tight.
Figure 8: AP300 Antenna Connection
Mode Radio 1 Uses Radio2 Uses
802.11abgn 3x3 MIMO Ant1, Ant2, Ant3 NA
802.11abgn 2x2 MIMO Ant1, Ant3 NA
802.11abg Ant1 NA
A
2
A
2
A
L
A
N
R
F
1
R
F
2
2
1
2
3
antenna
connector