User's Manual
Table Of Contents
- About This Guide
- Meru Access Points and Radio Switch
- Installing the AP300
- Installing the AP200
- Installing the OAP180
- Installing the AP150
- Installing the RS4000
- Specifications
- AP Accessories
- Mounting Bracket Stencils
- Cautions and Warnings
- Regulatory Information
© 2008 Meru Networks, Inc. Installing the AP300 14
To complete AP300 installation, you need the items listed below.
Table 4: AP300 Installation Items
Additional Equipment
A power source is needed to power the AP300. Available options are:
z External ACC-AP300-PWR power supply
z 802.3af compliant PoE device
z Draft 802.3at compliant PoE device
You can optionally add a remote antenna mount; see Install the Optional Remote Antenna Mount on the
Ceiling.
Installation Type Consumable Items Required
Horizontal mounting None
Vertical mounting over a wall stud
z Two #6 x 2" wood screws for a wood stud; or
z Two #6 x 1½" metal screws for a metal stud
z Mounting bracket
Vertical mounting on sheetrock
z Two #6 x 1 " s c r e ws
z Two #4-6 x 7/8" ribbed plastic wall anchors
z Mounting bracket
Horizontal mounting below a
hanging ceiling
z Two caddy fasteners
z Two plastic spacers
z Two keps nuts (with attached lock washer)
z Mounting bracket
Using existing third party brackets
z Use included shoulder screws