User's Manual
Table Of Contents
- About This Guide
- Meru Access Points and Radio Switch
- Installing the AP300
- Installing the AP200
- Installing the OAP180
- Installing the AP150
- Installing the RS4000
- Specifications
- AP Accessories
- Mounting Bracket Stencils
- Cautions and Warnings
- Regulatory Information
Manufacturing Information
© 2008 Meru Networks, Inc. Regulatory Information 125
Internal Use Only—Beta Draft
Model AP201 Rev 2
Model AP150
Singapore
For the AP201 Rev 2, AP208 Rev 2, and OAP180, the following approval information
applies:
Manufacturing Information
The AP150, AP200, and AP300 are built in Taiwan. Factory information is provided
under NDA and upon request.
AP300 Plenum Requirements
When installing the product in an air-handling space, as described in Article
300.22(C) of the NEC (2005), the unit should only be powered by the Ethernet port
(PoE), not by the AC-powered power supply.
When the product is installed in air-handling spaces, the cables employed should be
suitable under NEC Articles 300.22 and 725 and marked accordingly, for use in
plenums and air-handling spaces with regard to smoke propagation, such as CL2-P,
C L 3 - P, M P P o r C M P.
The products should be installed in accordance with all applicable, local regulations
and practices.
003NY07015 0000 003GZ07003 0000 003WY07005 0000
003NY06122 0000 003GZ06030 0000 003WY06046 0000
DA103798
IDA Standards
Complies with