User's Manual
Table Of Contents
- Contents
- Introduction
- OAP180 Access Point Features
- Special Release Software for Meru Controllers
- OAP180 Hardware Installation Instructions
- Limitations and Advisories
- Regulatory Information
- Documentation for this Release
- Contacting Meru
10 of 24 OAP180 Hardware Installation Instructions
© 2007 Meru Networks, Inc.
2. Place the V-shaped part of the bracket around the pole and tighten the securing
nuts just enough to hold the bracket to the pole. (The bracket may need to be
rotated around the pole during the alignment process.)
Note:
Always attach the bracket to a pole with the open end of the mounting
grooves facing up.
3. Use the included nuts to tightly secure the wireless OAP180 to the bracket.