Technical data

240 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
Configuring QoS Rules With the CLI
controller (config-qosrule)# dstip subnet_IP_addr (for example,172.27.128.0)
controller (config-qosrule)# dstmask subnet_mask (for example, 255.255.192.0)
controller (config-qosrule)# action forward
controller (config-qosrule)# avgpacketrate 50
controller (config-qosrule)# tokenbucketrate 10000
controller (config-qosrule)# droppolicy head
controller (config-qosrule)# exit
The following example configures a QoS rule for a 1 Mbps CBR-encoded video
streamed from Windows Media Server 9 over UDP transport.
The following lists the example’s configuration parameters:
 Rule ID: 11
 Network protocol: 17 (UDP)
 QoS protocol: None
 Source IP address: 0.0.0.0
 Source subnet mask: 0.0.0.0
 Source port: 0
 Destination IP address:10.10.43.100 (This is the IP address of the wireless station
receiving the video stream.)
 Destination subnet mask: 255.255.255.255
 Destination port: 5004
 Action to take if packets match rule: Forward
 Drop policy: Head
 Token bucket rate: 128 kbytes/second
 Average packet rate: 10 packets/second
The following commands configure the QoS rule for the video streamed from Windows
Media Server 9 over UDP transport:
controller (config)# qosrule 11 netprotocol 17 qosprotocol none
controller (config-qosrule)# srcip 0.0.0.0
controller (config-qosrule)# srcmask 0.0.0.0
controller (config-qosrule)# srcport 0
controller (config-qosrule)# dstip 10.10.43.100
controller (config-qosrule)# dstmask 255.255.255.255
controller (config-qosrule)# dstport 0
controller (config-qosrule)# action forward
controller (config-qosrule)# droppolicy head
controller (config-qosrule)# tokenbucketrate 128000
controller (config-qosrule)# avgpacketrate 10
controller (config-qosrule)# end