Technical data

Configuring QoS Rules With the Web UI

Figure 34: Add a QoS Rule

3. In the ID field, type a unique numeric identifier for the QoS rule. The valid range

is from 0 to 6000.

4. In the Destination IP fields, type the destination IP address to be used as criteria

for matching the QoS rule. The destination IP address is used with the destination

subnet mask to determine matching.

5. In the Destination Netmask fields, type the subnet mask for the destination IP

address.

6. In the Destination Port field, type the TCP or UDP port to be used as criteria for

matching the QoS rule. To specify any port, type 0 (zero).

7. In the Source IP fields, type the source IP address to be used as the criteria for

matching the QoS rule. The source IP address is used with the source subnet mask

to determine matching.

8. In the Source Netmask fields, type the subnet mask for the source IP address.

9. In the Source Port field, type the TCP or UDP port to be used as criteria for

matching the QoS rule. To specify any port, type 0 (zero).

10. In the Network Protocol field, type the protocol number of the flow protocol for

the QoS rule. The protocol number can be a number 0 through 255. The protocol

number of TCP is 6, and the protocol number for UDP is 17. For a list of protocol

numbers, see http://www.iana.org/assignments/protocol-numbers.