Technical data

Viewing AP Status
© 2012 Meru Networks, Inc. Configuring Access Points 225
show ap-siblings
Displays the AP Siblings table. APs operating in the same
channel that can hear each other are AP-siblings. APs
can hear beacons with RSSI as low as -80 to -85dbm, but
RSSI values lower than this are not heard.
show ap-swap
Displays the access point replacement table.
show ess-ap
Displays the ESS-AP table for the access point.
show interfaces Dot11radio
Displays the configuration of the wireless interface.
show interfaces Dot11Radio
statistics
Displays the statistics related to the wireless interface.
show regulatory-domain
Displays the regulatory information for the country.
show statistics top10-ap-problem
Displays a list of the top 10 problem access points.
show statistics top10-ap-talker
Displays a list of the top 10 most active access points.
show topoap
Displays the topology of all access points as seen by the
coordinator.
show topoapap
Displays the Received Signal Strength Indicator (RSSI)
between all pairs of APs.
Table 17: Commands to View System Status
Command Purpose