Technical data

Configure an AP’s Radios with the CLI

Before you can configure any radio settings, you need to enter radio interface config-

uration mode. To do this, follow these steps:

Summary of Radio Interface Configuration Commands

The following is a summary of the commands available in radio interface configura-

tion mode:

Table 15: Entering Radio Interface Configuration Mode

Command Purpose

configure terminal

Enter global configuration mode.

interface Dot11Radio <ap-id>

Enter interface configuration for the specified AP and radio

interface. Use show interfaces Dot11Radio to obtain a list

of radio interfaces.

... commands ...

Enter the 802.11configuration commands here.

end

Return to privileged EXEC mode.

copy running-config

startup-config

This is an optional step to save your entries in the configuration

file.

Table 16: Commands available in Radio Interface Configuration Mode

Command Purpose

admin-mode Enables or disables a radio interface.

antenna-property Manages external wireless interface antennas.

channel Configures the channel ID.

localpower (new in 3.5) Configures the AP transmit power level for all APs

mode AP mode configuration.