Technical data

xviii Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
Audience
U-APSD support has been added for the AP1000 series. Refer to “Configure
U-APSD” on page 70 for more details.
DFS support has been added for the AP1000 series. This feature requires no
configuration, is always on, and cannot be disabled.
SIP over TCP communication has been implemented. Refer to “Optimizing Voice
Over IP” on page 241 for additional details on configuring a Voice over IP
deployment.
Several new AP models have been implemented: AP400i, AP400is, OAP433, and
AP1000e. See each AP’s individual Access Point Installation Guide for details.
This version of System Director supports the new MC6000 chassis controller. Refer
to the Meru Controller Installation Guide for controller specifications.
Audience
This guide is intended for network administrators configuring and maintaining the
Meru Wireless LAN System. Familiarity with the following concepts is helpful when
configuring the Meru Wireless LAN System:
Network administration, including:
Internet Protocol (IP) addressing and routing
Dynamic Host Configuration Protocol (DHCP)
Configuring Layer 2 and Layer 3 switches (if required by your switch)
IEEE 802.11 (Wi-Fi) concepts, including:
ESSIDs
WEP
Network Security (optional)
WPA
802.1X
Radius
X.509 certificates